Suns Shine Wood Protector

Description

The SUNS Wood Protector with nanotechnology is a transparent solvent for protecting all unpainted and un-oiled soft and hardwoods, both indoors and outdoors. The SUNS Wood Protector with durable nano protection creates an invisible, well-adhesive, UV-filtering and vapour-permeable layer that protects the wood against water, oil, mosses, algae and fungi and thus preserves the natural appearance of the wood. For teak, pre-treat with SUNS Wood Cleaner to obtain good impregnation.

Instructions
Shake well before use! Only apply outdoors or in a well-ventilated area. Make the surface dry, clean and free of grease. Use the SUNS Wood Cleaner for quick and effective cleaning of wood. Do not use below 5 °C.

Apply the product undiluted and spread evenly with a soft brush or brush. The product may foam slightly. Application is also possible with a non-misting applicator gun (0.8 mm), do not vaporize. Avoid drops and wipe immediately. Apply 2x for optimum protection.

Allow the first layer to dry for approximately 1 hour before applying a new layer. Dries within a few hours, depending on temperature and substrate. The product has fully reacted in approximately 24 hours. Do not load the surface with water or oil during this time.

Safety
Causes serious eye irritation. Wear protective gloves, and eye and face protection. Keep out of reach of children.